As the number of electric vehicle users increases every day, a safe and efficient charging experience is becoming increasingly important. While modern electric vehicles have advanced safety systems, correct usage habits play a critical role in both preserving the life of the vehicle battery and maximizing the efficiency of the charging infrastructure.
ORGE's AC and DC charging solutions are designed with user safety, energy efficiency, and compliance with international standards in mind. However, as with any technological system, correct usage is crucial.
Here are the key points to consider when charging with ORGE charging stations:
1. Check Cable and Socket Before Charging
Before starting the charging process, check for:
• Crushing on the cable,
• Breakage,
• Burn marks,
• Deformation on the socket ends,
• Moisture or dirt buildup.
Dirty or damaged connections can cause:
• Overheating,
• Energy loss,
• Charging interruptions,
• Socket malfunctions.
Although the Type 2 connectors used in ORGE chargers offer high durability, user control is crucial for safe operation.
2. Do Not Force the Charging Cable
The charging cable should:
• Not be used under tension,
• Not be left under a vehicle,
• Not be bent sharply,
• Not have a vehicle driven over it.
Cables are special energy transmission elements that carry high current. Physical deformations can damage the conductive structure over time.
Cable health is critical, especially in high-power applications such as 22 kW AC charging.
3. Charge in Facilities with Proper Grounding
Electric vehicle charging systems have strong energy electronics infrastructures. Unhealthy electrical installations or inadequate grounding can lead to:
• Failure to start charging,
• Charging interruption,
• Vehicle malfunctions,
• Damage to electronic components.
ORGE charging stations continuously check grounding and protection systems for safe charging. Therefore, the electrical infrastructure where the installation is done must comply with standards.
4. Do Not Use Extension Cords or Adapters
Using extension cords randomly in electric vehicle charging systems poses a serious risk.
Extension cords with insufficient cross-section:
• May overheat,
• May cause voltage drops,
• May create a fire risk.
ORGE devices are designed to connect directly to the appropriate electrical infrastructure. For safety reasons, additional adapters or low-quality interconnects should be avoided.
5. Pay Attention to Power Interruptions During Charging
Power outages in the grid:
• Sudden power interruptions,
• Voltage fluctuations,
• Phase problems can affect the charging process.
ORGE devices, thanks to advanced protection algorithms, put the system into safe mode in these situations. However, frequent power problems may indicate that the facility infrastructure needs to be checked.
6. Be Careful During Rain and Outdoor Use
Modern ORGE charging stations are outdoor-compatible products with IP protection rating. However, users are still advised to:
• Not leave open sockets submerged in water,
• Not allow foreign objects to enter the socket,
• Not leave the cable in puddles.
Although electric vehicle charging systems have safety protocols, physical protection is also part of the user's responsibility.
7. Terminate Charging Properly
After charging is complete:
1. Terminate the charging process via the application or device,
2. Check that the socket lock is open,
3. Remove the cable without forcing it,
4. Insert the cable properly back into place.
Sudden pulling or forcing may damage:
• The socket mechanism,
• The locking system,
• The communication pins.
The mechanical locking systems in ORGE devices are designed for safety and require controlled use.
8. Avoid Constantly Charging the Battery to 100%
For most electric vehicles in daily use, the ideal charge level is usually in the 80-90% range.
Constantly:
• 100% charge,
• Discharging to very low levels,
can negatively affect battery life.
ORGE charging infrastructures are designed to work in compatibility with the vehicle manufacturer's battery management systems. For optimal use, the vehicle manufacturer's recommendations should be considered.
9. Follow Mobile Application and Software Updates
Software is of great importance in smart charging systems.
In ORGE's software-supported charging solutions, users can:
• Monitor charging status,
• View energy consumption,
• Perform authorization processes,
• Provide remote management.
Software updates are important for:
• Security improvements,
• Performance improvements,
• New vehicle compatibility.
10. Avoid Unauthorized Interventions
Unauthorized interventions on chargers:
• Opening the inner cover,
• Changing electrical connections,
• Disabling protective elements pose serious safety risks.
Electric vehicle charging systems operate with high energy and should only be serviced by authorized technical teams.
Safe Charging is the Foundation of Sustainable Mobility
Electric vehicle technologies are not just about the vehicles themselves. Safe, high-quality, and standard-compliant charging infrastructure forms the foundation of a sustainable mobility ecosystem.
ORGE charging solutions are developed based on:
• user safety,
• energy efficiency,
• intelligent management,
• international standard compliance.
With correct usage habits, a safe charging experience can be maintained smoothly for many years.
